用户手册主网页每个电极图案包含一个碳工作电极(5毫米× 4毫米矩形),一个碳对电极,和一个银/银…
后丝网印刷电极(SPE)故障排除和常见问题首先出现在技术信息库.
每个电极图案包含一个碳工作电极(5毫米× 4毫米矩形),一个碳对电极,和一个印在单个衬底上的银/氯化银参考电极丝网。这些电极丝网印刷在聚合物基板上,仅用于水溶液。
丝网印刷电极带有5个衬垫,连接到GDX-CVS. 这些电垫中只有四个被使用,如图所示。GDX-CVS恒电位器控制和测量工作电极;因此,在丝网印刷电极上有两个单独的“引线”或“衬垫”分别连接到仪器上,即使它们都连接到同一个工作电极(用红色标记)。
使用GDX-CVS,工作(电流)垫和工作(电压)垫始终连接。你可以把它们想象成“2个接触垫对1个电极”。两者都不是理由。它们分开的原因是,当需要将两根导线连接到工作电极时,这些相同的spe被用于其他仪器和实验。对于GDX-CVS来说,这是无关紧要的,它们总是一起做空。
Related TILs
Go Direct Cyclic Voltammetry System Troubleshooting and FAQs
Can I get a platinum electrode for the Cyclic Voltammetry System?
The SPE doesn't fit straight in my GDX-CVS.
The post Screen-Printed Electrodes (SPE) Troubleshooting and FAQs appeared first on Technical Information Library.
The post 我在哪里可以得到USB数码显微镜附带的软件?我没有CD驱动器。首先出现在技术信息库.
.USB数码显微镜可以在该产品的产品页面上获得。进入产品页面。然后选择底部的“兼容设备和软件”选项卡。在兼容软件下,您将看到MicroCapture Plus (Windows and macOS)。点击Windows或MacOS来下载适合你电脑的软件。上面的链接也可以。
The post 我在哪里可以得到USB数码显微镜附带的软件?我没有CD驱动器。首先出现在技术信息库.
.The post 我在哪里可以得到我的Celestron数码显微镜成像仪附带的软件?我没有CD驱动器。首先出现在技术信息库.
.用于Celestron数字显微镜成像仪的软件可以在每个数字成像仪的Celestron产品页面上找到。转到下面的产品页面,然后看看右下角。点击支持和下载。你需要的软件将被列出。点击列出的软件下载到你的电脑。
The post 我在哪里可以得到我的Celestron数码显微镜成像仪附带的软件?我没有CD驱动器。首先出现在技术信息库.
.Logger Pro发布说明与Logger Pro应用程序一起安装。在macOS上,查看Applications/Logger Pro 3/。在Windows上,查看Program Files (x86)\Vernier…
后我可以在哪里找到Logger Pro发布说明?首先出现在技术信息库.
.Logger Pro发布说明与Logger Pro应用程序一起安装。
在macOS上查看Applications/Logger Pro 3/。在Windows上,查找Program Files (x86)\Vernier Software\Logger Pro 3\en-US。
3.16.2版本的注释在这里。